Hinge introduced
Hinge furniture copper ornaments. Commonly known as the hinge. Often composed of two folding metal parts to connect the two parts and make the activities in furniture. Hinge: A device used to connect or turn to the door, cover or other swing components can in order to rotate, usually connected by a pin, a pair of metal blades. About split hinge

The type of hinge
Ordinary hinge: for cabinet doors, windows, doors, etc.. The material quality of iron, copper and stainless steel. The shortcomings of ordinary hinge with a spring hinge function, install the hinge must be fitted with a variety of touch beads, or the wind will be blowing doors.
Pipe hinge: also known as a spring hinge. Mainly used for the connection of the furniture door, and general requirements for board thickness of 16 to 20 mm. Made of galvanized iron, zinc alloy. The spring hinge attached to the adjusting screw can be up and down, around the height adjustment plate thickness. It is characterized according to the space, with doors opening angle. In addition to the general 90-degree angle, 127 degrees, 144 degrees, 165 degrees are the corresponding hinge match all kinds of doors have the appropriate degree of stretch.
Door hinge: it is of general type and bearing type, ordinary type have said earlier. Bearing type from the material can be divided into copper, stainless steel quality. From the current consumption situation, the choice of copper bearing hinge more, because of its aesthetic appearance, bright, affordable, and are equipped with screws.
Other hinge: glass hinge, table hinge, turning of the door hinge. Glass hinge for frameless glass cabinet doors installed on the glass thickness is not greater than 5 to 6 mm.